Chemical Accidents Reconstruction Expert Witnesses: 8

Scott L. Turner is a highly qualified Commercial Motor Vehicle (CMV) Transportation Expert, FMCSR Regulatory and PHMSA-HMR Expert with approximately 30-years experience in the highly specialized field of CMV crashes and incidents, and 16 years as the CEO of a nationwide CMV crash & HazMat disaster response corporation. 

Mr. Turner's career includes personal response and/or investigation of over 1,000 CMV crashes, 200 cargo-tank truck crashes/incidents and a multitude of industrial setting incidents including fixed facilities, loading docks and loading rack disasters. His FMCSR and PHMSA knowledge (Federal Enforcement Training), detailed reporting and testimony can be a focal point of any civil litigation, where commercial motor vehicle crashes and/or transit incidents are at issue, with or without hazmat involvement. Mr. Turner is qualified in both the Federal Court system as well as multiple States throughout the United States and testifies on an approximate 50/50 average of Defense to Plaintiff ratio.

Areas of Expertise:

• Level 1 FMCSA Inspections
• Commercial Motor Vehicle (CMV) Post-Crash Inspection
• CMV Post-Crash Investigation
• Driver Qualifications
• HOS / Fatigue Driving
• Motor Carrier Fitness Standards
• Safety Programs
• Trucking Industry Standards
• Cargo-Tank Truck Incidents / Crashes
• CMV loading/Off-loading Cases (van, cargo-tank, flatbed)
• Flatbed, Cargo Securement Failure
• Loading Dock Incidents w/ CMV
• Forklift Incidents w/ CMV
• CMV Crash Involving Hazmats
• Loading Rack Explosions / Disasters
• Pedestrian v. CMV Incidents

Services Include:

• Litigation Support
• Trial Preparation Consulting
• Courtroom Testimony
• Commerical Vehicle Accident Investigations
• CMV, Highway Construction Zone Crashes
• CMV Loading and Offloading Investigation
• Level 1 FMCSA Audits
• Load Securement Incidents

Greg Gerganoff, CSP, Esq., possesses extensive experience in safety compliance and practice involving OSHA and MSHA.  He obtained is law degree from Western Michigan University, Cooley Law School and practiced general civil law for approximately 12 years in Colorado prior to entering the safety profession. Mr. Gerganoff earned a Certified Safety Professional certification and has 18 years of field safety experience in mining, oil and gas, construction, manufacturing, power plant outages, and light rail construction.

His professional safety experience includes OSHA / MSHA Safety field work and compliance with experience in the heavy construction, manufacturing, light rail construction, power plant outages, public schools, oil and gas, mining, pipeline, and trenching and excavation industries.

• Authorized Outreach Trainer for OSHA General Industry.
• PEC Safeland Basic and Core instructor (Oil and gas).
• MSHA Approved Instructor (Blue Card) for Surface, Metal/nonmetal.
• Member of the American Society of Safety Professionals.

Litigation Support: Mr. Gerganoff assists with discovery questions regarding safety matters. Safety opinions based upon statutory, administrative, judicial rulings and related industry association safety policies ancillary to OSHA and MSHA.  Mr. Gerganoff is retained by attorneys for both Plaintiff and Defendant. Some of the subject matter litigation he has handled include:

View Greg Gerganoff's Consulting Profile.

Peter Howell, PE, CSP, CFEI, FAIChE  has almost 50 years of experience in the Design, Operation, Maintenance and Management of Chemical and Petrochemical Facilities with positions such as process engineer, project engineer, maintenance foreman, technical manager, engineering manager, plant manager and vice president and general manager.

Mr. Howell has investigated approximately 125 incidents that occurred in chemical plants, refineries, pulp and paper mills and similar industries for attorneys, insurance companies and regulatory agencies. He has determined the root causes using methodologies consistent with NFPA 921, Center for Chemical Process Safety, United Steel Workers, and the National Safety Council.  The root causes determined were based on the evidence, Recognized and Generally Accepted Good Engineering Practices and federal regulations.

Mr. Howell has extensive experience in developing, implementing and auditing the elements of OSHA's process safety management (PSM) regulation and EPA's risk management plan (RMP). He also has extensive experience in accident and incident investigations involving fire, explosion, and release of toxic and hazardous materials.  He He frequently serves as an expert witness and provides litigation support.

Areas of Expertise:

Meyer R. Rosen, FRSC, FAIC, CPC, CChE, is a leading creative consultant for the Legal Profession and specialty Chemical / Personal Care Industries. He is the Founder & President of Interactive Consulting, Inc. (www.chemicalconsult.com). 

Meyer is a Forensic Litigation expert for both plaintiff and defense in hazardous chemicals, products liability, personal injury, fires and explosions, intellectual property and trade secret cases. He also provides Technical Marketing, New Business Development, Technical Consulting and Professional Editing services internationally to the Specialty Chemical, Personal Care, Cosmetic, Pharmaceutical, Medical Device, and Allied Industries. 

Meyer also has 15 years of experience as a Professor of Fire Technology at Westchester Community College. Mr. Rosen is Editor- in- Chief of Harry’s Cosmeticology, 9th Ed. A 2,600-page trilogy on all aspects of the cosmetic industry (www.harryscosmeticology.com)’ as well as being Emeritus-Editor-in-Chief for EuroCosmetics magazine (Germany) and Editor-in-Chief of the Delivery System Handbook. 

Technology Expertise (Intellectual Property/Chemical Industry): Mr. Rosen provides consultation and litigation support in patent infringement, trade secret issues, and licensing matters. His scientific areas of expertise include, but are not limited to:

• Organosilicones: Surfactants, Emulsions, Foams, Antifoams, Silane Coupling Agents
• Water Soluble Polymers, Poly(ethylene oxide), Polyethylene Glycol, and Poly (acrylamide) and Water Insoluble Polymers
• Colloid and Surface Chemistry: Stability of Dispersions, Wetting & Spreading Phenomena, Suspensions & Emulsions, Clays, Paint & Coatings, Personal Care, Cosmetics
• Flocculating and Coagulating Agents
• Applied Rheology, Rheology Modification of Aqueous & Non-Aqueous Media

Certifications:

• Chartered Chemist and Fellow: Royal Society of Chemistry – London
• Nationally Certified Professional Chemist and Professional Chemical Engineer
• Fire and Explosion Expert (Advanced Training)
• Fellow: American College of Forensic Examiners
• Fellow: American Institute of Chemists
• Diplomate: American Board of Forensic Examiners
• Diplomate: American Board of Forensic Engineering and Technology

View Meyer Rosen's Consulting Profile.

John A. Williams, PhD, PE, CFEI, MBA, ASA, AIChE Fellow. 

Dr. Williams delivers Technology Assessments and Financial Valuation Analysis for business disputes involving intellectual property, trade secrets, patent infringement, licensing, royalties, capital investment, manufacturing operations expenses, ad valorem taxes, and lost profit calculations. He is an Accredited Senior Appraiser by the American Society of Appraisers, 

Practical 40 years of engineering experience in renewable and conventional energy technologies and facilities encompassing oil & gas, refining, biofuels, biomass, solar, wind, geothermal, coal, chemicals, steel, and power generation. A NAFI Certified Fire and Explosions Investigator, Dr. Williams performs forensic investigations of fires, explosions, equipment failures, and industrial accidents. 

Dr. Williams is a licensed Professional Engineer in the States of Alabama, California, Florida, Illinois, Indiana, Kentucky, Louisiana, Massachusettes, Michigan, Missouri, North Carolina, Ohio, Oklahoma, South Dakota, Texas, Utah, Virginia, Washington, and Wisconsin.

Envista Forensics is a global leader in Forensic Engineering & Recovery Solutions. They provide Cause & Origin, Failure Analysis, Fire and Explosion Investigations, Accident Reconstruction, Damage Evaluations and Equipment Restoration Services following disasters of all kinds. Envista has offered Consulting Services to the insurance, legal and risk management industries, as well as businesses, public entities, and universities for over 25 years.

Their Experts travel globally from 30 offices located across the U.S., Canada, Mexico, the U.K., Australia and Singapore. Envista's experience counts when equipment, systems, structures, or data have been threatened by catastrophe or litigation. Their experts and advisors determine cause and responsibility, and identify the nature and extent of damage or loss and provide a full range of solutions to protect their assets.

Envista's technical professionals are trusted advisors and industry leaders. Their expertise is broad and deep, capable of withstanding all forms of scrutiny. Envista's services are available globally so that certainty is assured no matter where in the world it is needed. As the recovery from disasters has grown more complex, Envista has developed a comprehensive array of services to help their clients and has associates located around the globe to provide assurance no matter the type of loss or location of the disaster. Envista helps attorneys quickly get to meaningful answers on the many technical issues at the center of a dispute. Their engineers have decades of experience working with both defendants and plaintiffs.

They offer effective Expert Witness Testimony, with the ability to communicate effectively, build rapport with juries and judges, and maintain adherence to structured, methodical approaches in drawing conclusions are all extremely critical. Envista Forensics understands how critical the selection of an expert can be, and we understand what makes experts effective. Their court qualified experts have extensive experience providing expert testimony on a wide variety of engineering and technical matters.

Areas of Expertise:

View Envista's Consulting Profile.

Michael A. Pollock, PE, USPTO, is a Mechanical Engineer responsible for the design and engineering of commercial, industrial, manufacturing, institutional, and residential venues, as well as efforts relating to services and products used in and around these facilities. Mr. Pollock's full CV can be viewed at cogentexpert.com.

Business and industries include electronics, safety and construction, building materials, polymers and plastics, instrumentation manufacturing, petrochemicals, chemicals, pharmaceuticals, colleges, athletic facilities, textiles, coatings and resins, food storage, biosciences, supermarkets, inks & pigments, automotive, facility and real estate operations, agricultural, transportation, nuclear, healthcare, nutrition, retail, distributors, pulp and paper, packaging, utilities, apparel, and R&D centers.

Litigation Support - Mr. Pollock is a subject matter expert in Commercial and Industrial Engineering Applications and Projects, as well as engineering standards and applicable codes (ASHRAE, ASME, NIST, NFPA, NBIC, ASTM, SAE, LEED, ASCE, GMP, ISA, BOCA, and EPA Regulations.) He has engaged with local, state, and governmental officials and agencies regarding numerous matters over his commensurate years of experience.

Areas of Expertise:

Registrations

• Professional Engineer: PA (PE075410)
• American Bar Association (ABA) – Construction Forum
• Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration)
• United States Patent & Trademark Office Registered (USPTO)                              

Forensic Consulting Experience

Warehouse Distribution Facility – Maryland - Evaluated a $10M (million) claim relating to purported construction defect claims by the 600,000 sq. ft. facility owner against the facility construction contractor and an original equipment manufacturer relating to installed infrastructure in the facility. Developed an expert opinion and expert report regarding the analysis of the purported defects and a proposed repair solution to correct said defects. 

 Psychiatric Hospital Facility – North Carolina – Evaluated a $28M (million) construction claim by the general contractor against a hospital facility concerning a $100M facility construction project.  Developed an expert opinion and report for general construction issues, constructability, design revisions, and corresponding delay analysis for mechanical, HVAC, electrical, smoke and fire, structural, security and building automation systems. 

Forensics Consulting Work-in-Progress 

• 2022 – International Trade Commission (ITC) Matter – Resin Manufacturing Facility Construction Delay / Completeness Analysis
• 2022 – Mechanical Systems Coatings Matter Analysis
• 2021 – Industrial Manufacturing Facility Standard of Care Matter, Construction Defect, Construction Delay     
• 2021 – Electrical Distribution System Construction Defect Matter, Standard of Care
• 2021 – Hotel Facility HVAC Materials of Construction Related Defect Matter

Cory W. Bruner has 28 years of experience in Safety in Construction and General Industry. Mr. Bruner is a qualified Safety Professional and holds a Safety Management Practitioner Certification. He has 25 years of Safety, Health and Environmental experience and 15 years specializing in Electrical and  Concrete Pumping. Mr. Bruner has provided services to clients in the Concrete Pumping, General, Construction, Electrical, Oil and Gas, Legal, and Insurance Industries. 

Concurrently with Bruner Safety Consulting, Mr. Bruner serves as Corporate Director of Risk Management, Safety and HR at Facility Solutions Group, Inc.  In this role, he oversees all aspects of Safety and Health including but not limited to policy and development, implementation, training, pre-qualification coordination, injury prevention investigation and reporting, site loss control auditing, management of facility safety trainers and staff, safety, and safety budgeting. 

Litigation Support - Mr. Bruner has provided expert opinions in numerous state and federal accident and injury cases. He specializes in electrical, concrete pumping accidents, and fatalities in construction, oil and gas, chemical process, and systems industry accidents and fatalities. Mr. Bruner is experienced with Federal and numerous State DOT / FMCSA regulatory compliance matters. He provides root cause analysis with corrective measures. 

Areas of Expertise:

View Bruner Safety Consulting's Consultant Profile.